Orient Ceratech Ltd Stock Analysis

BSE: 504879 | NSE: ORIENTCER | Refractories | Small Cap

BSE Share Price 29-Sep-2023 18:02
38.05 -0.07 (-0.18%)

DeciZen - Make an Informed Decision on Orient Abrasives

Overall Rating
M-Cap below 500cr. High Risk from low Liquidity

1. Quality

2. Valuation


3. Price Trend

Orient Abrasives Price Chart

P/E Ratio (SA):
Market Cap:
455.2 Cr.
52-wk low:
52-wk high:
Bole Toh?

1. Is Orient Ceratech Ltd a good quality company?

Past 10 year’s financial track record analysis by Moneyworks4me indicates that Orient Ceratech Ltd is a below average quality company.

2. Is Orient Ceratech Ltd undervalued or overvalued?

The key valuation ratios of Orient Ceratech Ltd's currently when compared to its past seem to suggest it is in the Fair zone.

3. Is Orient Ceratech Ltd a good buy now?

The Price Trend analysis by MoneyWorks4Me indicates it is Strong which suggest that the price of Orient Ceratech Ltd is likely to Rise in the short term. However, please check the rating on Quality and Valuation before investing

10 Year X-Ray of Orient Abrasives:

Analysis of Financial Track Record

Data adjusted to bonus, split, extra-ordinary income, rights issue and change in financial year end
Data adjusted to bonus, split, extra-ordinary income, rights issue and change in financial year end

Data adjusted to bonus, split, extra-ordinary income, rights issue and change in financial year end.

Financial track record gives insight into the company's performance on key parameters over the past ten years. MoneyWorks4me’s proprietary colour codes make it easy for retail investors to gauge the company’s past performance.
Orient Ceratech Ltd has not performed well majority of the past ten years indicating its past ten year financial track record is not good

Value Creation

Value Creation Index Colour Code Guide

ROCE % 10%5.5%8%13.4%4.6%8.2%8.1%9%5.5%3%-
Value Creation Index -0.3-0.6-0.4-0.1-0.7-0.4-0.4-0.4-0.6-0.8-

Growth Parameters

Growth Parameters Colour Code Guide

Sales 182174183286219324313346302258263
YoY Gr. Rt. %--4.2%5%56.5%-23.6%47.8%-3.3%10.5%-12.6%-14.5%-
Adj EPS 1.20.6120.
YoY Gr. Rt. %--47.1%60.9%95.2%-70.7%128.8%0%23.7%-44.3%-43%-
BVPS (₹) 11.912.31314.715.216.317.419.420.220.722
Adj Net Profit 14.57.712.324.
Cash Flow from Ops. 31.615.411.38.921.614.39.940.829.517.7-
Debt/CF from Ops.


CAGR Colour Code Guide

9 Years 5 Years 3 Years 1 Years
Sales 4%3.4%-6.2%-14.5%
Adj EPS -8.8%-2.1%-26.8%-43%
Share Price 9% 6.9% 23.6% 27.3%

Key Financial Parameters

Performance Ratio Colour Code Guide

Return on Equity %
Op. Profit Mgn % 19.814.916.
Net Profit Mgn %
Debt to Equity
Working Cap Days 1721841981722872392552262523030
Cash Conv. Cycle 1041111211041631191531511671760

Recent Performance Summary

No data to display

Return on Equity has declined versus last 3 years average to 5.20%

Sales growth has been subdued in last 3 years -6.20%

Net Profit has been subdued in last 3 years -26.78%

Sales growth is not so good in last 4 quarters at -0.48%

Latest Financials - Orient Ceratech Ltd.

Standalone Consolidated
TTM EPS (₹) 1.1 1.2
TTM Sales (₹ Cr.) 263 283
BVPS (₹.) 22 22.1
Reserves (₹ Cr.) 251 253
P/BV 1.73 1.72
PE 33.99 31.15
From the Market
52 Week Low / High (₹) 21.75 / 42.77
All Time Low / High (₹) 0.08 / 67.00
Market Cap (₹ Cr.) 455
Equity (₹ Cr.) 12
Face Value (₹) 1
Industry PE 34.5

Management X-Ray of Orient Abrasives :

Shareholding Pattern

Promoter's Holding & Share Pledging

Pledged *
* Pledged shares as % of Promoter's holding (%)

Event Update

Login/Register to view analysis.

Analyst's Notes

Key Ratios of Orient Abrasives

Adj EPS (Rs.)
Sales (Cr.)
ROE (%)
ROCE (%)


Orient Ceratech Ltd FAQs

Company share prices are keep on changing according to the market conditions. The closing price of Orient Abrasives on 29-Sep-2023 18:02 is : 38.05.
Market capitalization or market cap is determined by multiplying the current market price of a company's shares with the total number of shares outstanding. As of 29-Sep-2023 18:02 the market cap of Orient Abrasives stood at ₹ 455.2.
The latest PE ratio of Orient Abrasives as of 29-Sep-2023 18:02 is 33.99.
The latest PB ratio of Orient Abrasives as of 29-Sep-2023 18:02 is 1.73
The 52-week high of Orient Abrasives is ₹ 42.77 and the 52-week low is ₹ 21.75.
The TTM revenue is Trailing Twelve Months sales. The TTM revenue / sales of Orient Abrasives is ₹ 263.2 ( Cr.) .

About Orient Ceratech Ltd

Orient Abrasives was set up in 1974, in technical collaboration with Karborundum, Bentueky, Czechoslovakia by the Rajgarhia group of industries as a venture to manufacture Calcined and Fused Alumina products.

The company enjoys the position of being the largest producer of Calcined and Fused Products in India. An ISO 9001 certification and a strong management have led the way for the Company to become a large organization, recognized for its quality offerings.

The company offers a wide range of Refractory and Monolithic products for the iron and steel industry and enjoy large domestic and international clientele. An in-house R&D facility supports the division’s product development initiatives. This makes OAL the preferred choice for quality products.

Headquartered in New Delhi, India, OAL's manufacturing facilities are located in Porbandar, Gujarat and Bhiwadi, Rajasthan and have the distinction of being ISO - 9001 quality certified.

The Porbandar facility began commercial production in 1974. The plant was setup in technical collaboration with Karborundum Bentueky, Czechoslovakia and is the largest producer of synthetic high alumina materials in India, today.

The current installed capacity of the plant for Fused Aluminum Oxide Grains is 21,000 MT and for Calcined products is 74,250 MT. The company is currently in the process of increasing the installed capacity of Fused Aluminum Grains to 36,000 MT. Currently the plant draws the majority of its power requirements from two furnace oil based captive generator sets. In light of the rising cost of furnace oil the management is setting up a lignite based power plant to meet its current and future power requirements.

The refractory manufacturing facility is based in Bhiwadi, Rajasthan which is located in close proximity to New Delhi. This facility began commercial production in 1986. The division also has an allied plant based in Salem, Tamil Nadu for manufacturing monolithics and some castables are manufactured at the Porbandar, Gujarat plant.

The Bhiwadi facility is spread over 27 acres of land. The refractory facility is divided into 3 independent sub-divisions one each for the manufacture of slide gate plates, continuous casting refractories and castables and pre-cast shapes. The division currently produces more than 20,000 pieces of slide gate plate, 18,000 pieces of Continuous Casting Refractory products and over 2000 tonnes of catables and mortars on a monthly basis.

All the products manufactured by the company are a result of an intensive development effort, which is carried out at the in-house Research and Development facility. This research and development facility is recognised by the Government of India and is fully equipped to carry out all testing and development activities with a wide range of equipment including:

  • XRD Equipment
  • TG – DTA
  • Dialotometer – RTE
  • Thermal Conductivity Apparatus
  • Creep Tester
  • HOMR testing equipment

The key Indian customers procuring the raw materials from the company include:

  • Grinding wheel manufacturers including Grindwell Norton (Saint Gobain Abrasives) and Carborundum Universal;
  • Refractory manufacturers including Bharat Refractories, Tata Refractories, OCL India, Vesuvius India, Orissa Industries, ACE Refractories, VRW Refarctories, SKG Refractories, IFGL, Sarvesh Refractories and Maithan Ceramics.
  • OAL refractory customers include large domestic integrated steel producers and mini steel plants that include Steel Authority of India, Mukund Steel, Tata Iron and Steel Company, RINL – Vizag, Sunflag Iron, Lloyd Steel, Essar Steel and the Jindal Group. With close to 100 small to medium sized iron and steel producing Indian companies as customers, OAL is a preferred vendor for a large number of steel producers in the country.

OAL has significant presence in the global market place with exports to over 16 countries across the globe including Spain, Turkey, Egypt, Indonesia, Saudi Arabia, Thailand and Greece.

Orient Abrasives Limited, manufacturer of Refractories and Raw Materials for bonded and coated abrasive products, refractories, castables and mortar is committed to be responsive to the customer needs for their success in the market.

Product range of the company includes:

High Alumina Raw Material

  • Calcined Bauxite
  • Brown Fused Alumina
  • White Fused Alumina
  • Pink Fused Alumina
  • White Fused Mullite
  • High Alumina Refractory Cement
  • Zirconia Mullite (Zirmul)
  • Alumina Magnesia

Refractory and Monolithics

  • Isostatically Pressed Continuous Casting Refractories
  • Slide Gate Plates
  • Nozzles and Well Blocks
  • Tundish Nozzles
  • Bottom Purging Refractories and Top Purging Lances
  • Slag Arresting Darts
  • Basic Spray Mass for Tundish Working Lining
  • Castables  

Awards /Achievements

Recipient of IRMA award for Excellence in Export Performance for the year 2006-07 and IRMA award for Excellence in Performance for the year 2006-07

The company has also received ISO 9001 certficate.

Read More Read Less
You have 2 views remaining as a Guest User. To get DeciZen Rating of 3,500+ Stocks based on their Quality, Valuation and Price Trend Login | Register Now